IBV 6000 Series

    Spécifications techniques

    Specifications

    IBV 6072

    IBV 6172

    IBV 6272

    Input

    1 VPP

    Electrical connection

    M23 flange socket (female), 12-pin

    Cable length

    ≤ 60 m at UP > 4.9 V

    ≤ 30 m at Iencoder ≤ 120 mA

    Note the voltage supply range of the connected encoder

    Interpolation1)

    IBV 6072: 2-fold

    IBV 6172: 2-fold (fixed), 5-fold, 10-fold (switchable)

    IBV 6272: No interpolation (fixed), 5-fold, 10-fold (switchable), 20-fold, 25-fold, 50-fold, 100-fold (switchable)

    Input frequency2) for interpolation

    2-fold

    500 kHz

    5-fold

    10-fold

    200 kHz

    200 kHz

    200 kHz

    100 kHz

    133 kHz

    66 kHz

    100 kHz

    50 kHz

    80 kHz

    40 kHz

    50 kHz

    25 kHz

    25 kHz

    12.5 kHz

    20-fold

    25-fold

    50-fold

    100-fold

    100 kHz

    80 kHz

    40 kHz

    20 kHz

    50 kHz

    40 kHz

    20 kHz

    10 kHz

    33 kHz

    26 kHz

    13 kHz

    6.6 kHz

    25 kHz

    20 kHz

    10 kHz

    5 kHz

    20 kHz

    16 kHz

    8 kHz

    4 kHz

    12.5 kHz

    10 kHz

    5 kHz

    2.5 kHz

    6.25 kHz

    5 kHz

    2.5 kHz

    1.25 kHz

    Outputs

    1 VPP and TTL (for possible combinations see Selecting the output signals)

    The following specifications refer to TTL outputs

    Electrical connection

    Two M23 flange sockets (male), 12-pin

    Cable length

    ≤ 100 m (Uas ≤ 50 m)

    Edge separation a1)

    ≥ 0.150 µs

    ≥ 0.100 µs

    ≥ 0.220 µs

    ≥ 0.345 µs

    ≥ 0.465 µs

    ≥ 0.585 µs

    ≥ 0.950 µs

    ≥ 1.925 µs

    Reference mark signal1)

    Pulse width 90° elec. (not with IBV 6072) or 270° elec.

    Fault indication1)

    Through fault detection signal Uas or, in addition, Ua1/Ua2 high impedance

    Voltage supply

    5 V ± 0.25 V (only through X2)

    Current consumption3)

    IBV 6072: ≤ 60 mA

    IBV 6172: ≤ 90 mA

    IBV 6272: ≤ 130 mA

    Operating temperature

    Storage temperature

    0 °C to 70 °C

    –30 °C to 80 °C

    Vibration 50 to 2 000 Hz

    Shock 11 ms

    ≤ 10 m/s2

    ≤ 300 m/s2

    Protection

    IP 65

    Weight

    Approx. 0.7 kg

    Bold: This version is the factory default setting

    1) Adjustable

    2) Adjustable; nominal value. The actual input frequency can be up to 5 % lower. Exceeding this limit results in failure.

    3) Not including current consumption of the encoder or output load (80 mA with recommended input circuitry)