TS 460/TS 642/ TS 740

    Spécifications techniques

    Radio and infrared

    Infrared

    Workpiece touch probe

    TS 460

    TS 642

    TS 740

    Probe accuracy

    ±5 µm with use of the standard stylus T404

    ±1 µm with use of the standard stylus T404

    Probe repeatability

    Repeated probing from
    one direction

    2 s 1 μm at a probing velocity of 1 m/min

    Typical values:

    2 s 1 μm at a probing velocity of 3 m/min

    2 s 4 μm at a probing velocity of 5 m/min

    2 s 0.25 μm
    at a probing velocity of 0.25 m/min

    Deflection of probe contact

    5 mm in all directions (with stylus length L = 40 mm)

    Deflection force

    Axial: Approx. 8 N

    Radial: Approx. 1 N

    Axial: Approx. 0.6 N

    Radial: Approx. 0.2 N

    Probing velocity

    5 m/min

    0.25 m/min

    Collision protection

    Optional

    Protection EN 60 529

    IP68

    Operating temperature

    10 °C to 40 °C

    Storage temperature

    –20 °C to 70 °C

    Mass without taper shank

    ≈ 0.2 kg

    Approx. 1.1 kg

    Fastening*

    • With taper shank1)
    • By M12x0.5 external thread
    • With taper shank1)
    • Without taper shank (connecting thread M30x0.5)

    Signal transmission

    Radio and infrared transmission (selectable) with 360° range to SE

    Infrared transmission with 360° range

    Transmission angle of infrared signal*

    0° or +30°

    Interface*

    HTL, EnDat 2.2

    HTL

    Transceiver unit*

    • SE 6612)/SE 660 for radio and infrared transmission3)
    • SE 642 for infrared transmission3)
    • SE 540 for infrared transmission; for integration in the spindle head

    SE 540, SE 642, or SE 660 (only infrared)

    SE 540 or SE 642

    TS switch-on/off

    Radio or infrared signal (selectable) from SE

    Via switch in the taper shank or infrared signal from SE

    Infrared signal from SE

    Voltage supply

    Two rechargeable or nonrechargeable batteries, 1 V to 4 V each,
    size 1/2 AA or size LR2

    Two rechargeable or nonrechargeable batteries, 1 V to 4 V each,
    size C or size A4)

    Operating time

    Typically 90 h3) with alkaline batteries (included in delivery);

    Typically 400 h3) possible with lithium batteries

    Typically 400 h with alkaline batteries (included in delivery)

    Typically 800 h possible with lithium batteries

    Typically 220 h with alkaline batteries (included in delivery)

    Typically 500 h possible with lithium batteries

    * Please select when ordering

    1) see Mounting page 18

    2) With EnDat interface

    3) Reduced operating time if there is high surrounding radio traffic or if probing intervals are short and frequent

    4) Via adapter, included in delivery