CNC PILOT 640

    Spécifications techniques

    Specifications

    Components

    MC main computer with TFT color flat panel display (19-inch), or

    MC main computer with integrated TFT color flat-panel display (15.6 inch) for multitouch operation

    CC, UEC or UMC controller unit

    TE operating panel (19-inch or 15.6-inch) with

    • integrated machine operating panel
    • feed-rate and spindle override potentiometer
    • with electronic handwheel available (only for 19-inch version)

    Operating system

    HEROS 5 real-time operating system for machine control

    NC program memory

    1.8 GB (on CFR compact flash memory card)

    Input resolution and display step

    X axis: 0.5 µm, diameter: 1 µm

    U, V, W, Y, Z axis: 1 µm

    B, C1/C2 axis: 0.001°

    Interpolation

    Straight line: in 2 principal axes (max. ±100 m), optional in 3 principal axes

    Circle: In 2 axes (radius max. 999 m), optional additional linear interpolation in the third axis

    C1/C2 axis: interpolation of X and Z linear axes with the C1/C2 axis (option)

    B axis: 5-axis interpolation between X, Z, Y, B, and C axes (option)

    Feed rate

    mm/min or mm/revolution

    Constant surface speed

    Max. feed rate (maximum 60 000/pole pair number × spindle pitch) with fPWM = 5000 Hz

    Spindle

    Maximum 60 000 rpm (with 2 pole pairs)

    Axis feedback control

    Integrated digital drive control for synchronous and asynchronous motors

    Position loop resolution: Signal period of the position encoder/1024

    Cycle time of position controller: 0.2 ms

    Cycle time of speed controller: 0.2 ms

    Cycle time of current controller: minimum 0.05 ms

    Error compensation

    Linear and nonlinear axis error, backlash, reversal peaks during circular movements

    Static friction

    Data interfaces

    Gigabit Ethernet interface 1000BASE-T

    4 x USB (1 x front USB 2.0; 3 x back panel USB 3.0)

    Diagnostics

    Fast and simple troubleshooting through integrated diagnostic aids

    Ambient temperature

    Operation: In electrical cabinet: 5 °C to 40 °C
    In operating panel: 0 °C to 50 °C

    Storage: –20 °C to 60 °C