GAGE-CHEK 2000

    Spécifications techniques

    GAGE-CHEK 2013

    GAGE-CHEK 2023

    GAGE-CHEK 2093

    Axes

    3 (two of which can be enabled with a software option)

    Encoder interface

      1 VPP, EnDat 2.2

      TTL

    2 ×   1 VPP, EnDat 2.2,
    1 ×   TTL

    Input frequency

      1 VPP: ≤ 400 kHz

    ≤ 5 MHz

      1 VPP: ≤ 400 kHz
      TTL: ≤ 5 MHz

    Subdivision factor

    4096-fold (only with 1 VPP)

    Display step

    Configurable for up to eight digits; linear axes X,Y, and Z: down to 0.000 01 mm;
    rotary axis Q: down to 0.000 01° (00° 00’ 00.1”)

    Display

    7-inch screen with multi-touch functionality (15:9);
    WVGA resolution: 800 x 480 pixels for dialogs, inputs, position values, and graphical functions

    Functions

    • Precise capturing of measured values, and spot-on positioning in metrology applications
    • 100 presets
    • Measurement series with min. and max. value recording
    • Recording of the difference between min. and max. values (range)
    • Data transfer—manually, continuously, or when triggered by a touch probe
    • User administration
    • Configurability of each axis for length or angle display

    Additional encoder input

    (software option AEI1)

    One additional encoder input

    Error compensation

    • Linear error (LEC) and segmented linear error compensation (SLEC) via up to 200 supporting points
    • Table squareness error compensation; matrix compensation (NLEC) via up to 99 x 99 points

    Data interface

    1x Ethernet 100 Mbit/1 Gbit (RJ45); 1x Hi-Speed USB 2.0 (Type A)

    Other connections

    Foot switch for two functions

    Accessories

    Mutli-Pos and Duo-Pos stand, Mutli-Pos holder, power cable, adapter connector, foot switch

    Power connection

    AC 100 V to 240 V (±10 %); 50 Hz to 60 Hz (±5 %); ≤ 38 W

    Operating temperature

    0 °C to +45 °C (storage temperature: –20 °C to +70 °C)

    Protection EN 60529

    IP65; back panel: IP40

    Mounting

    Multi-Pos or Duo-Pos stand; Multi-Pos holder; mounting systems with 50 mm x 50 mm hole pattern

    Mass

    Device with Multi-Pos stand:  2.0 kg; device with Duo-Pos stand:  1.5 kg;
    device with Multi-Pos holder:  1.7 kg; device alone:  1.3 kg